Juniper Systems Logo

Archer 4 Android Recovery Mode

April 18, 2025 Article #17104

If you have lost or forgotten the pin/password and are locked out of your Archer 4 device, please follow the steps below.

Warning: Using this feature will result in loss of data and deleting installed apps from the device.

  1. Power off the device
    • Press the Power button and the Volume Up key simultaneously to access the power menu.
    • Select Power off.
  2. Plug in a USB cable to a computer.
  3. Press and hold the Volume down button. While still holding the button down, insert the USB cable into the Archer 4 to launch the Fast boot screen.
  4. Press the volume down button to navigate to Recovery mode. Press the Power button to select recovery mode.
  5. The device should restart to the "No command" screen.
    • This looks like an Android logo lying down.
  6. Press and hold power button and volume up button for 2 seconds simultaneously. Release both buttons at the same time to launch the recovery mode menu.
  7. Use the volume down key to navigate to Wipe data / Factory reset. Press the power key to select.
  8. Use the Volume down button to navigate to Factory data reset. Press the power key to select.
  9. Press power key to select Reboot system now.
Reviewed & Approved: TR 18April25