Clean Boot (restore system to factory defaults)

February 2011

Warning: All data and programs installed by the user will be removed from the internal flash storage memory. If possible, backup all data to another location or computer before restoring the system to a factory default state.

 

To perform a Clean Boot (set factory defaults) on the Mesa Rugged Notepad, follow the steps below.

 

  1. Perform a Reset by pressing and holding the Power Button for 3 seconds then select Reset from the menu (or continue to hold the Power Button until the display flashes off).
  2. Immediately press and simultaneously hold the keys shown in the image below.

    Mesa Clean Boot
  3. Release all keys a couple of seconds after the initial boot splash screen appears.

 

Confirmation that restoring the system to a factory default state was successful is when the Set Date & Time screen appears.

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2018 Juniper Systems Inc. All rights reserved.