Clean Boot (restore system to factory defaults)

August 2008

Warning: All data installed by the user will be removed from the internal flash storage memory (except the backup \Storage folder). If possible, backup all data to another location before restoring the system to a factory default state.

 

To remove all data from the main internal storage memory (root \Device and all sub-folders except \Storage) on the Field PC , follow the steps outlined on page 28 of the Field PC Owner's Manual or below.

 

  1. Perform a Reset by pressing and holding the Power Button for 3 seconds then select Reset from the menu (or continue to hold the Power Button until the display flashes off).
  2. Immediately press and simultaneously hold the Ctrl, Alt, and Del keys.
  3. Release all keys a couple of seconds after the Ultra-Rugged Field PC screen appears.

 

Confirmation that the restore to factory defaults worked is when the Align Display (calibrate touchscreen) screen appears.

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2018 Juniper Systems Inc. All rights reserved.