Set to Factory Defaults (Clean Boot)

May 2006

Warning: Setting the Archer Field PC to factory defaults removes installed programs and data from the device, and sets the device to a state similar to when it was shipped from the factory. Backup all software programs, licenses, and data to a desktop PC or to a removeable storage device before proceeding.

 

To set the Archer 2 to factory defaults (Clean Boot), hold down the Power button for 15-20 seconds until a blue screen with sliders appears, move the "Set Factory Defaults" slider to Yes, and then tap Exit.

 

To set the original Archer Field PC to factory default settings (Clean Boot):

 

1. Press and hold the Power Button until the Archer resets (or select Reset from the Power Button menu that appears).

 

2. Immediately press and simultaneously hold the keypad keys shown in the image below (before or while the green activity LED is on) and then release these keys once the "Ultra-Rugged Field PC" splash screen appears.

 

Home
Up Arrow
Context(Menu)

 

3. Wait a few minutes for the factory reset to complete. An indication of success is when you are asked to align the display. Calibrate the touchscreen and follow all other instructions until you are back at the Today screen.

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2018 Juniper Systems Inc. All rights reserved.