TALtech CE-Wedge

June 2009

The TALtech CE-Wedge software provides a method to allow input of data from a device connected to the serial port of the Field PC, and then automatically enter the data into any text field of a software program currently containing the cursor. For a more detailed explanation and alternative solutions, please visit our Wedge Software for the Field PC FAQ webpage. Additional information is available at:

http://www.taltech.com/PDFdocs/new/CE_Wedge.pdf
http://www.taltech.com/PDFdocs/ce.pdf

 

Install Instructions

To install the TALtech CE-Wedge program on the Field PC, follow the steps below. We recommend printing a copy of these instructions or reading through all of the steps before beginning.

  1. Download, copy, and run the Embedded Visual Basic (eVB) Runtime install file named "msvbppc.armv4.cab" on the Field PC ( download from our website). Recommended to install to default directory ("Main Memory" or "Device") and tap "Yes to All" if asked to overwrite files.
  2. Download, copy, and run the correct file from the table below for your model Field PC.

    Field PC Model File Download
    Allegro MX CEWedgeAllegroMX.CAB
    Archer CEWedgeArcher.cab
    Allegro CX CEWedgeAllegroCX.CAB
    Allegro CE/DOS CEWedgeAllegroCEDOS.CAB

 

Running CE-Wedge on the Field PC

You can run CE-Wedge by tapping on the Field PC`s Start menu > Programs > CE-Wedge menu option. The CE-Wedge program appears, as shown below.

CEWedge

The user guide for your serial device should state how to trigger the ASCII text data output through the RS-232 serial cable; and explain what baud rate, parity, data bit, stop bit, and flow control are required to be setup (or how to change these settings). The most common settings are shown in the table below.

Baud Rate 9600bps
Parity None
Data Bit 8
Stop Bit 1
Flow Control None

 

Purchasing CE-Wedge and unlocking the full version

After 30 days, the demo version of CE-Wedge will expire if you do not purchase and unlock the full version. To purchase and unlock the full version of CE-Wedge, follow these steps:

  1. Run CE-Wedge on the Field PC.
  2. Tap on the words "Serial Port:" located to the left of the serial port drop-down box on the main CE-Wedge window, as shown below.

    CEWedge

    A "CE-Wedge Demo" window will then appear.

    CEWedge Demo
  3. Write down the Unique ID number, and use this number to purchase CE-Wedge from http://www.taltech.com/products/pricing.html. If you have previously purchased CE-Wedge, contact support@taltech.com or call 800-722-6004 your current Unique ID number.
  4. Enter the unlock key, then tap OK.

 

Backing up the Field PC

Methods and instructions for backing up the Field PC to better avoid any potential need to re-install or re-register software, please visit our System Backup of the Field PC FAQ webpage.

 

Contact TAL Technologies, Inc.
www.taltech.com
800-722-6004 Main
215-496-0222
Tech: 215-496-0202
support@taltech.com

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2017 Juniper Systems Inc. All rights reserved.