GPS does not immediately track current position

August 2016

The default settings for the uBlox NEO M8 series receivers (such as are integrated into our newer rugged handheld computer units) are optimized more for vehicle navigation than for pedestrian tracking (as is the most common use case of our rugged handheld computer products).

 

The easiest methods to change the default settings are as follows.

 

For the Mesa 2, install and run the Geode Connect 1.1.0 or higher utility, and follow the instruction provided at this web page.

 

Geode Connect for full Windows

 

For the Allegro 2 or Archer 2, any unit that has an integrated uBlox NEO M8 receiver will already have OS release 1.7.2, 1.7.5, or newer installed which applies "Pedestrian" mode automatically.

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2017 Juniper Systems Inc. All rights reserved.