Bluetooth device will not re-connect

January 2010

Make sure you are waiting at least 10 seconds after turning the Archer on before trying to re-connect to a device that has Bluetooth wireless technology. This provides time for the Bluetooth drivers to reload. For more information, please visit our Bluetooth Connection issues website at:

Common connection issues with Bluetooth

When connecting a Bluetooth device using the Microsoft drivers, make sure you have the "Secure Connection" checkbox UNCHECKED when creating a new Outgoing Port as explained in the Bluetooth Setup instructions available on our website at:

Bluetooth Setup with Microsoft drivers

If you have already created an Outgoing Port (such as for connecting to a GPS receiver), you can edit the existing port by following these steps:

  1. Tap on Start > Settings > Connections tab > Bluetooth icon > COM Ports tab.
  2. Tap and hold the stylus on the name of the existing Outgoing Port (i.e.- "Garmin GPS 10 (COM5)") and then select Edit.
  3. Uncheck the "Secure Connection" checkbox, and then tap Finish.
Secure Connection

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2017 Juniper Systems Inc. All rights reserved.