Mounting Options and Specifications

August 2012

Note: This information is provided as a reference and does not imply that Juniper Systems will provide full support for the use of any specific third-party hardware with a Juniper Systems product.

 

Update Nov 2017 - The three mounting points (screw holes) on the back of the Mesa 2 are size #4-40 UNC with a max depth of 3/16th inch (or 4.76 mm).

 

Our rugged handheld computers provide mounting mechanisms and cable restraints for connecting cables, antennas, external devices (sensors), vehicles, poles, and other items in a permanent or semi-permanent fashion for use in many different applications.

 

Device or Antenna Mount in or on the Field PC

 

A device or antenna can be mounted to the rugged handheld computer inside or on top of an extended cap or expansion pod/pack. Mounting inside may require connection through Bluetooth, a card slot, or an expansion port (rather than a standard serial or USB port); and the use of padding around the device or antenna (may be included with extended cap). Mounting on top may require the use of an additional strap or bracket (may be included with extended cap), and perhaps the modification of the device or antenna cable with possible routing through a cable channel on the Field PC. Please contact our Sales Team for additional information and assistance with setting up your custom device or antenna mounting application.

 

Rugged Pole or Vehicle Mounts

 

The Mesa Mobile Dock (PN 22330) with Vehicle / Pole Mount attachment (PN 22886) provides a good solution along with one of the RAM Mount stands described at the following web pages.

 

 

A lower cost option may be the Mesa Pole Clamp (PN 23306) instead of the dock.

 

Other pole or vehicle mounting bracket (such as clamp) options that securely hold the Field PC (such as Archer) are mentioned at the following webpages.

 

SECO

 

 

SI Precision

 

 

Vehicle Cab or Office Mounts

 

The Power Dock accessory for the Field PC provides methods for securely mounting the dock in a vehicle cab or in an office, but may require the purchase of additional screws and/or adapter plates. Contact our Sales Team for additional information.

 

Another source for mounts is RAM Mounting (http://www.ram-mount.com/).

 

A custom swivel claw bracket can be purchased for the Allegro Field PC. This is most often used in the cab of a combine for use with a HarvestMaster system, but can be purchased separately for use in other applications as well. Please contact our Sales Team for additional information.

 

Archer Mounting screw holes specifications

 

The accessory mounting screw holes on the back and bottom of the Archer Field PC have the following specifications.

 

Top Back

 

  1. #8-32 UNC screw hole width and thread size
  2. 1/4 inch (6.35 mm) maximum thread depth
  3. 2 inch (50.8 mm) space between hole centers

 

Bottom Communication Module

 

  1. #4-40 UNC screw hole width and thread size
  2. 1/4 inch (6.35 mm) maximum thread depth
  3. 2.06 inch (52.3 mm) space between hole centers

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2017 Juniper Systems Inc. All rights reserved.