Internal GNSS receiver configuration tool

January 2018

The Geode Connect 1.2.1 for full Windows utility can be used to connect the Geode, or can be used to apply better optimized settings to the integrated uBlox GNSS receiver in the Mesa 2. Save and then run the below file on your full Microsoft Windows computer such as Mesa 2. This requires the Microsoft .NET Framework 4.5 be installed first (if not already). See the release notes document for further information on this version.

 

Geode-1.2.1.exe

 

Instructions for configuring built-in GNSS in Mesa 2 for better performance

 

The original default settings for the built-in uBlox GNSS receiver in the Mesa 2 were optimized for vehicle navigation rather than pedestrian tracking. To use Geode Connect 1.2.0 or higher to apply better settings for pedestrian tracking, follow these steps.

 

  1. Download the above file to your Mesa 2 (or copy it to the Mesa 2 such as using a thumb drive), and then double-tap on the file. Follow the on-screen steps to install.
  2. At the “Connect Device” screen select the “Internal Receiver…”
  3. Once connected, tap on the round Settings (gear) icon > Advanced bar.
  4. Once you are at the “Configure Internal GNSS” screen looking at the advanced settings, scroll to the very bottom and tap on the “Reset Receiver” button.
  5. At the “Factory Reset” warning message, tap on the “Restore Defaults” button.

 

After this is complete, if you have previously applied other settings using u-Center, you may need to apply those settings again such as those described at this web page.

 

GPS software can not see all NMEA sentences

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2018 Juniper Systems Inc. All rights reserved.