A2 Enable Power on COM1 utility

December 2014

Installing the following file utility will enable power on COM1 to behave similar to our previous product models which track the state of the pin 4 Data Terminal Ready (DTR) line. Click on the file link below to download/save the file, copy (do not extract) the file to the handheld, and then locate and tap on the file name in File Explorer on the handheld to install.

 

A2-Enable-Power-On-COM1.CAB

 

Devices which have been customized to actually be powered through the COM1 port pin 4 Data Terminal Ready (DTR) line, such as is provided on our previous product models, can continue to be powered through COM1 (through the pin 9 Ring-In line) on the Allegro 2 or Archer 2 by creating or purchasing a RI-to-DTR (pin 9 to 4) adapter cable (such as our part number 24938) as well as installing this utility.

 

For additional information (such as alternative COM1 power behavior options), please see the following knowledge base article.

 

Powering devices through bottom ports

SNOWGAGE

HARVESTMASTER

JUNIPER SYSTEMS

CEDAR PRODUCTS

JUNIPER ASPECT

DIVISIONS

Juniper Systems &

HarvestMaster Main Office
_____

1132 W 1700 N

Logan, UT 84321 U.S.A.

Tel: 435.753.1881

Fax: 435.753.1896

Juniper Systems, EMEA

Main Office
_____

1st Floor

4 The Courtyard

Buntsford Gate, Bromsgrove

B60 3DJ, UK

Tel: +44 (0) 1527 870773

HarvestMaster Europe

Main Office
_____

Bauernstrasse 9, 4600

Wels, Austria

Tel: +43 7242219333

Email: office@harvestmaster.eu

SOCIAL

juniper blog

linkedin

youtube

facebook

twitter

SITE MAP

Copyright © 2019 Juniper Systems Inc. All rights reserved.